6ES7323-1BH01-0AA0 SIEMENS

Supply voltage
Load voltage L+
Rated value (DC) 24 V
permissible range, lower limit (DC) 20.4 V
permissible range, upper limit (DC) 28.8 V
Input current
from load voltage L+ (without load), max. 40 mA
from backplane bus 5 V DC, max. 40 mA
Power losses
Power loss, typ. 3.5 W
Digital inputs
Number/binary inputs 8
Input characteristic curve acc. to IEC 61131, Type 1 Yes
Number of simultaneously controllable inputs
all mounting positions
6ES7323-1BH01-0AA0 Page 1
Date:
07/27/2012
subject to modifications
© Copyright Siemens AG 2012
up to 40 °C, max. 8
up to 60 °C, max. 8
Input voltage
Type of input voltage DC
Rated value, DC 24 V
for signal "0" -30 to +5 V
for signal "1" 13 to 30 V
Input current
for signal "1", typ. 7 mA
Input delay (for rated value of input voltage)
for standard inputs
at "0" to "1", min. 1.2 ms
at "0" to "1", max. 4.8 ms
at "1" to "0", min. 1.2 ms
at "1" to "0", max. 4.8 ms
Cable length
Cable length, shielded, max. 1000 m
Cable length unshielded, max. 600 m
Digital outputs
Number/binary outputs 8
Functionality/short-circuit strength Yes ; Electronic
Response threshold, typ. 1 A
Limitation of inductive shutdown voltage to L+ (-53 V)
Lamp load, max. 5 W
Controlling a digital input Yes
Load resistance range
lower limit 48 Ω
upper limit 4 kΩ
Output voltage
for signal "1", min. L+ (-0.8 V)
Output current
for signal "1" rated value 0.5 A
for signal "1" permissible range for 0 to 60 °C, min. 5 mA
6ES7323-1BH01-0AA0 Page 2
Date:
07/27/2012
subject to modifications
© Copyright Siemens AG 2012
for signal "1" permissible range for 0 to 60 °C,
max.
0.6 A
for signal "1" minimum load current 5 mA
for signal "0" residual current, max. 0.5 mA
Output delay with resistive load
"0" to "1", max. 100 µs
"1" to "0", max. 500 µs
Parallel switching of 2 outputs
for increased power No
for redundant control of a load Yes ; only outputs of the same group
Switching frequency
with resistive load, max. 100 Hz
with inductive load, max. 0.5 Hz
on lamp load, max. 10 Hz
Aggregate current of outputs (per group)
horizontal installation
up to 40 °C, max. 4 A
up to 60 °C, max. 4 A
Cable length
Cable length, shielded, max. 1000 m
Cable length unshielded, max. 600 m
Encoder
Connectable encoders
2-wire sensor Yes
Permissible quiescent current (2-wire sensor),
max.
2 mA
Isochronous mode
Isochronous operation (application synchronized up
to terminal)
No
Interrupts/diagnostics/status information
Alarms
Alarms No
Diagnostic messages
Diagnostic functions No
6ES7323-1BH01-0AA0 Page 3
Date:
07/27/2012
subject to modifications
© Copyright Siemens AG 2012
Diagnostics indication LED
Status indicator digital output (green) Yes
Status indicator digital input (green) Yes
Galvanic isolation
Galvanic isolation digital inputs
between the channels Yes
between the channels, in groups of 8
between the channels and the backplane bus Yes ; Optocoupler
Galvanic isolation digital outputs
between the channels Yes
between the channels, in groups of 8
between the channels and the backplane bus Yes ; Optocoupler
Permissible potential difference
between different circuits 75 VDC / 60 VAC
Isolation
Isolation checked with 500 V DC
Connection method
required front connector 20-pin
Dimensions
Width 40 mm
Height 125 mm
Depth 120 mm
Weight
Weight, approx. 220 g
Status Jul 17, 2012