6MD1022-0AA00 SIEMENS

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent 
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert 
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are 
graded according to the degree of danger.
DANGER 
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING 
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION 
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE 
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will 
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to 
property damage.
Qualified Personnel 
The product/system described in this documentation may be operated only by personnel qualified for the specific 
task in accordance with the relevant documentation, in particular its warning notices and safety instructions. 
Qualified personnel are those who, based on their training and experience, are capable of identifying risks and 
avoiding potential hazards when working with these products/systems.
Proper use of Siemens products 
Note the following:
WARNING 
Siemens products may only be used for the applications described in the catalog and in the relevant technical 
documentation. If products and components from other manufacturers are used, these must be recommended 
or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and 
maintenance are required to ensure that the products operate safely and without any problems. The permissible 
ambient conditions must be complied with. The information in the relevant documentation must be observed.
Trademarks 
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication 
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability 
We have reviewed the contents of this publication to ensure consistency with the hardware and software 
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the 
information in this publication is reviewed regularly and any necessary corrections are included in subsequent 
editions.
"mySupport" - CAx data 
In the CAx data area in "mySupport", you can access the current product data for your CAx 
or CAe system.
You configure your own download package with a few clicks.
In doing so you can select:
 Product images, 2D dimension drawings, 3D models, internal circuit diagrams, EPLAN 
macro files
 Manuals, characteristics, operating manuals, certificates
 Product master data
You can find "mySupport" - CAx data on the Internet