CC-TCNT01 Honeywell

Experion Series C input/output chassis-less mounted modules and field level network gateways providethe physical connection between an automation system and the process when used with the C300Controller. Input/Output Modules and field terminations are combined in the same area. The Input/OutputModules are plugged into Input /Output Termination Assemblies to eliminate the need for a separatechassis to hold the electronics assemblies.C300 ControllerThe C300 Controller is constructed using the Series C form factor that employs an Input OutputTermination Assembly (IOTA) and an electronics module which mounts and connects to the IOTA. OneC300 Controller contains all of the control functionality and the communications functions with plug-inmodules.The C300 Controller may operate in both non-redundant and redundant configurations. Redundantoperation requires a second identical controller and connecting cables, which is the typical configuration.The C300 Controller is connected to the associated I/O hardware by a pair of I/O Link Interface cablesThe table below identifies the C300 Controller components and its associated components. TheC300Controller supports non-redundant and fully redundant operation. Redundancy is built in to the controller,so that just adding another controller and a redundancy cable; a redundant controller pair is achieved.Note that the ‘CC’ designation on the model number indicates the printed wiring boards are conformallycoated for additional protection from the environment, (CU = uncoated).Components Description Model No.C300 Controller Module A distributed process controller and I/O gateway for the Experionsystem. Module contains printed circuit assemblies, statusindicators and a display, inside in a plastic housing. Modulemounts to its Input Output Termination Assembly (IOTA).Supply Rating: 0.311A @ 24VDCCC-PCNT01CU-PCNT01C300 Controller InputOutput Termination Assembly(IOTA)Provides the connection point for theC300 Controller module andall cable terminations to the controller, (FTE, IO Link,Redundancy, Battery and Time Source cable terminations).Provides 24Vdc power distribution to the controller module.Supply Rating: 0.311A @ 24VDCNote: The C300 Controller IOTA supports only one controllermodule.CC-TCNT01CU-TCNT019 Port FTE ControlFirewall ModuleProvides FTE distribution to in-cabinet network nodes.(C300 Controllers and Series C Modules)Supply Rating: 0.112A @ 24VDCCC-PCF901CU-PCF9019 Port Control Firewall IOTA Provides connection for eight FTE cables from in-cabinetcontrollers and Series CFIMs. The 9th port provides an uplink tothe FTE supervisory network. Provides 24Vdc power distributionto the control.Ethernet: 9 RJ-45 ConnectionsFiber-Optic: Model Ca-FSMx01 FTE Single Mode Fiber ModuleSupply Rating: 0.30mA@24VDCModel Ca-FMMx01 FTE Multi-Mode Fiber ModuleSupply Rating: 0.30mA@24VDCCC-TCF901CU-TCF901The Series C modules comprise: Input Output Termination Assembly (IOTA): An assembly that holds the IOM and theconnections for field wiring, Input Output Module (IOM): A device that contains most of the electronics required to perform aspecific I/O function. The IOM plugs onto the IOTA.