CP451-10 YOKOGAWA

YOKOGAWA CP451-10 S2 PROCESSOR MODULE

Packaging & Delivery

Shipping Port: Xiamen, China
Payment: Bank of Chicago, Bank of Singapore
Express cooperation: fedex, DHL, UPS and your express account 
Service: Professional Sales provides 24 hours /7 days online service

Product Description:

General
Specifications
<<Contents>> <<Index>>
 GENERAL
This GS covers the hardware specifications of the 
Field Control Unit (FCU) which is the core of the 
control function of the Field Control Station (FCS).
 HARDWARE SPECIFICATIONS 
For the installation specifications and the environmental 
conditions common to the systems, refer to “Vnet/IP 
System Overview (Vnet/IP Edition)” (GS 33K01A10-
50E).
Processor
VR5432 (133 MHz)
Main Memory Capacity
32 Mbyte
Memory Protection During Power Failure
Battery
Battery Back-up for Main Memory: Max. 72 hours
Battery Recharge Time: Min. 48 hours
FCU Status Contact Output 
2 terminals (NC, C)
Contact Points open during FCU failure
Contact Rating: 30 V DC, max. 0.3 A
Communication Interface 
Vnet/IP Interface: Dual-redundant
For more details, refer to “Integrated Production Control 
System CENTUM VP System Overview (Vnet/IP 
Edition)” (GS 33K01A10-50E).
No. of Node Units Connectable
Max. 14/FCU
The total number of ESB Bus Node Units and ER 
Bus Node Units that can be connected to FCU are 14 
or less. (ESB Bus Node Units: 9 or less)
LFS1500 allows up to 3 nodes, and can be expanded 
to 14 if LFS1550 Application capacity Expansion 
Package (for AFV10) is added.
To connect a node unit to the FCU, a Node Unit 
Expansion License (Option code: /NDEL) is required 
for the node unit.
Module configuration
Power Supply Module (PW481 or PW482 or PW484): 
Two modules in case of a dual-redundant 
configuration. 
Processor Module (CP451): Two modules in case of 
a dual-redundant configuration.
I/O Modules(*1): Max. 8
*1: Non-standard components.
ESB Bus Node Units Connection
When connecting an ESB Bus Node Unit to FCU, 
install ESB Bus Coupler Module (EC401) on FCU.
EC401 must be installed in slot 7 and slot 8. 
For the dual-redundant configuration of the processor 
modules, EC401 must be installed in both slot 7 and 
slot 8. 
In case ESB Bus has a single configuration, EC401 
must be installed in slot 7 and keep slot 8 empty. 
ER Bus Node Units Connection
When connecting an ER Bus Node Unit to FCU, 
install ER Bus Interface Master Module (EB401) on 
FCU.
To make single configuration, EB401 must be 
installed in an odd-number slot, and keep empty the 
right side of the installed EB401.
See “ER Bus Interface Master Module (for FIO)” (GS 
33K50F40-50E) for further information.
Power Supply
Voltage: 100-120 V AC, Frequency: 50/60 Hz
Voltage: 220-240 V AC, Frequency: 50/60 Hz
Voltage: 24 V DC
Specify with Suffix Codes.
Power Consumption 
100-120 V AC: 200 VA
220-240 V AC: 230 VA 
24 V DC: 5.5 A 
Weight
Approx. 7 kg (AFV10S)
Approx. 8 kg (AFV10D)
Mounting
19-inch Rack Mounting:
 Rack mount (8 x M5 screws)
 Insulation bush (accessory)
Connection
Power Supply: M4 screw terminal connection
Grounding: M4 screw terminal connection
Contact Output: M4 screw terminal connection
Network: Connect UTP cable (CAT5e or better) to 
Layer 2 switch.
Models AFV10S, AFV10D
Field Control Unit
Duplexed Field Control Unit
(for Vnet/IP and FIO, 19-inch Rack 
Mountable Type) 

The following is my contact information, you are very welcome to come to me for inquiries:

Contact person：Panda
Email Address:：panda@fenoux.com
WhatApp： +86 13376987741

RELATED PRODUCTS