JRMSI-MB70AS4 YASKAWA

JRMSI-MB70AS4 YASKAWA Central control module

Packaging & Delivery

Shipping Port: Xiamen, China
Payment: Bank of Chicago, Bank of Singapore
Express cooperation: fedex, DHL, UPS and your express account 
Service: Professional Sales provides 24 hours /7 days online service
Product Description:

Part Number JRMSI-MB70AS4
Manufacturer Yaskawa
Type PCBs

System may start unexpectedly upon application of power, resulting in death or serious injury.
Clear all personnel from the drive, motor and machine area before applying power. Secure covers, couplings, shaft keys 
and machine loads before applying power to the drive
Do not attempt to modify or alter the drive in any way not explained in this manual.
Failure to comply could result in death or serious injury.
Yaskawa is not responsible for any modification of the product made by the user. This product must not be modified.
Do not allow unqualified personnel to use the equipment.
Failure to comply could result in death or serious injury.
Maintenance, inspection, and replacement of parts must be performed only by authorized personnel familiar with 
installation, adjustment and maintenance of AC drives.
Do not use an improper voltage source.
Failure to comply could result in death or serious injury by fire.
Verify that the rated voltage of the drive matches the voltage of the incoming power supply before applying power

Periodic Maintenance Safety
DANGER! Do not change wiring, remove covers, connectors or options cards, or attempt to service the drive with power applied to the 
drive. Disconnect all power to the drive, and lock out the power source. After shutting off the power wait for at least the amount of time 
specified on the drive front cover safety label. Measure the DC bus voltage for unsafe voltages to confirm safe level before servicing to 
prevent electric shock. The internal capacitor remains charged even after the power supply is turned off. Failure to comply will result in 
serious injury or death from electric shock.
WARNING! Burn Hazard. Because the heatsink can get very hot during operation, take proper precautions to prevent burns. When 
replacing the cooling fan, shut off the power and wait at least 15 minutes to be sure that the heatsink has cooled down. Failure to 
comply may cause burn injury to personnel.
NOTICE: Equipment Damage. A motor connected to a PWM drive may operate at a higher temperature than a utility-fed motor and the 
operating speed range may reduce motor cooling capacity. Ensure that the motor is suitable for drive duty and/or the motor service 
factor is adequate to accommodate the additional heating with the intended operating conditions.
NOTICE: Insulation Tolerance. Consider motor voltage tolerance levels and motor insulation in applications with an input voltage of 
over 440 V or particularly long wiring distances

Yaskawa products are manufactured in Japan and are designed for Advanced manufacturing, milling, and factory automation usage. We also carry PCBs from other manufacturers such as Schneider Electric and KUKA.

The following is my contact information, you are very welcome to come to me for inquiries:

Contact person：Panda
Email Address:：panda@fenoux.com
WhatApp： +86 13376987741