MVI56-GSC PROSOFT

MVI56-GSC Prosoft  ControlLogix Adapter

Packaging & Delivery

Shipping Port: Xiamen, China
Payment: Bank of Chicago, Bank of Singapore
Express cooperation: fedex, DHL, UPS and your express account 
Service: Professional Sales provides 24 hours /7 days online service

Product Details

Please Read This Notice 
Successful application of this module requires a reasonable working knowledge of the Rockwell 
Automation ControlLogix hardware, the MVI56 GSC Module and the application in which the 
combination is to be used. For this reason, it is important that those responsible for implementation 
satisfy themselves that the combination will meet the needs of the application without exposing 
personnel or equipment to unsafe or inappropriate working conditions. 
This manual is provided to assist the user. Every attempt has been made to ensure that the 
information provided is accurate and a true reflection of the product's installation requirements. In 
order to ensure a complete understanding of the operation of the product, the user should read all 
applicable Rockwell Automation documentation on the operation of the Rockwell Automation 
hardware. 
Under no conditions will ProSoft Technology be responsible or liable for indirect or consequential 
damages resulting from the use or application of the product. 
Reproduction of the contents of this manual, in whole or in part, without written permission from 
ProSoft Technology is prohibited. 
Information in this manual is subject to change without notice and does not represent a 
commitment on the part of ProSoft Technology Improvements and/or changes in this manual or the 
product may be made at any time. These changes will be made periodically to correct technical 
inaccuracies or typographical errors. 
Warnings 
UL Warnings 
A Warning - Explosion Hazard - Substitution of components may impair 
suitability for Class I, Division 2. 
B Warning - Explosion Hazard - When in Hazardous Locations, turn off 
power before replacing or rewiring modules. 
Warning - Explosion Hazard - Do not disconnect equipment unless power 
has been switched off or the area is known to be nonhazardous. 
C Suitable for use in Class I, division 2 Groups A, B, C and D Hazardous 
Locations or Non-Hazardous Locations. 
ATEX Warnings and Conditions of Safe Usage: 
Power, Input, and Output (I/O) wiring must be in accordance with the authority 
having jurisdiction 
A Warning – Explosion Hazard – When in hazardous locations, turn off 
power before replacing or wiring modules. 
B Warning – Explosion Hazard – Do not disconnect equipment unless power 
has been switched off or the area is known to be non-hazardous. 
C These products are intended to be mounted in an IP54 enclosure. The 
devices shall provide external means to prevent the rated voltage being 
exceeded by transient disturbances of more than 40%. This device must 
be used only with ATEX certified backplanes. 
D DO NOT OPEN WHEN ENERGIZED. 

RELATED PRODUCTS

The following is my contact information, you are very welcome to come to me for inquiries:

Contact person：Niko
Email Address:：niko@fenoux.com
WhatApp： +86 13376987741